There is no need to panic if you find a hole in your wall. In most cases, it can be easily repaired.
Here are a few tips on how to do just that:
1. Determine the size of the hole. This will help you determine what type of repair material to use.
2. If the hole is less than 1 inch wide, use a toothpick or a wooden match to fill it in. Simply dip the object into some wood glue or white wood filler, and then insert it into the hole.
3. If the hole is between 1 and 4 inches wide, use a piece of drywall that is slightly smaller than the hole. Cut a piece of drywall that is about 2 inches larger than the hole on all sides. Then, use a utility knife to cut out the center of the drywall so that it fits into the hole. Apply some adhesive to the back of the drywall, and then insert it into the hole.
4. If the hole is larger than 4 inches wide, use a piece of drywall that is the same size as the hole. Cut a piece of drywall that is the same size as the hole on all sides. Apply some adhesive to the back of the drywall, and then insert it into the hole.
5. Once the drywall is in place, use a hammer to tap it into the wall until it is flush with the surface.
6. Wait for the adhesive to dry, and then sand down any rough edges.
7. Paint over the repaired area to conceal the repair job.
These are just a few tips on how to repair holes in your wall. If you have any questions, be sure to consult a professional. Happy repairing!
Looking to buy or sell a home in the near future? Get guaranteed results with the #1 RE/MAX Team in Toronto & the GTA.* Contact Frank Leo & Associates for more information.